Membrane condition
Open seams, punctures, shrinkage, surface wear, prior patches, and material compatibility are reviewed.
Brookfield office203-792-0580Flat & Low-Slope Roofing · Connecticut
New flat-roof installations and repairs.
Aardvark Roofing installs complete new flat and low-slope roofing systems and performs targeted repairs. Membranes, seams, flashings, penetrations, edges, transitions, and drainage must work together to manage water correctly.
Experienced Connecticut roofing
New installations and repairs require the right system and drainage details.
Water moves more slowly on a low-slope roof, making seams, drains, scuppers, curbs, penetrations, and perimeter details especially important. A new system must be installed for the roof's conditions, while a repair must be compatible with the existing membrane.
Aardvark Roofing installs new flat and low-slope roofs and performs repairs on homes, residential additions, porches, businesses, condominiums, and community properties. We also pay close attention where a flat roof meets a shingle roof or vertical wall.
- Complete new flat-roof installations
- Flat-roof leak diagnosis and repairs
- Drainage and edge details
- Flat-to-shingle transitions
Completed flat roofs
Residential and institutional flat-roof experience.
These completed projects show Aardvark Roofing’s experience installing GAF APP modified-bitumen torch-down roofing systems on different types of properties.
A complete new residential flat roof installed using a GAF APP modified-bitumen torch-down roofing system.
A complete new white GAF APP modified-bitumen torch-down roofing system installed at Sarah Lawrence College.
Flat-roof drain repair
A modified drain insert for a lasting repair.
During this flat-roof repair, Aardvark Roofing installed a modified drain insert designed to create a secure drainage connection and help prevent water from backing up behind the drain and entering the roofing system. The protective strainer also helps keep larger debris away from the drain opening so water can continue flowing off the roof.
Service details
Important installation and repair considerations.
A new installation or lasting repair must match the roof's conditions and account for movement, water flow, penetrations, and adjoining materials.
Drainage
Low areas, blocked drains, scuppers, gutters, and water paths can contribute to repeated leakage or premature wear.
Edges & penetrations
Perimeter metal, curbs, vents, walls, pipes, and rooftop equipment require secure, compatible flashing details.
System transitions
Where flat roofing meets shingles or another wall or roof surface, the materials must overlap far enough and in the correct order.
The Aardvark approach
Clear from the first conversation through the completed work.
- 1Identify
Confirm the existing roof type, leak pattern, drainage path, and prior repairs.
- 2Test
Inspect seams, transitions, penetrations, edges, and likely membrane defects.
- 3Specify
Choose a compatible repair or replacement approach for the roof system.
- 4Complete
Perform the work with attention to water flow and adjoining materials.
Helpful answers
Questions about flat & low-slope roofing.
Does Aardvark Roofing install complete new flat roofs?+
Yes. We install complete new flat and low-slope roofing systems for residential, institutional, commercial, condominium, and community properties, including GAF APP modified-bitumen torch-down systems.
Can a flat roof be repaired instead of replaced?+
Yes, when the defect is localized and the surrounding membrane remains serviceable. Widespread seam failure, saturated insulation, extensive deterioration, or repeated leaks may make replacement more practical.
Why does water remain on my flat roof?+
Low areas, structural movement, restricted drains, inadequate slope, or poor edge conditions can slow drainage. The significance depends on the roof system, the depth and duration of ponding, and whether leaks or deterioration are present.
Can shingles be used on a low-slope roof?+
Shingles require adequate slope and must be installed within the manufacturer's requirements. Areas below the permitted slope need a roofing system designed for low-slope conditions.
Do you repair the transition between a flat roof and a shingle roof?+
Yes. These transitions are common leak points. We evaluate how far the low-slope membrane extends, how the shingles overlap, and whether the flashing and drainage details are correctly integrated.
Priority service areas
Local roofing pages across western Connecticut.
See local project information, office contacts, and roofing services for the communities Aardvark serves.
Free roofing estimate
Let’s take a look at your roof.
Tell us what you are seeing and where the property is located. We will connect you with the right Aardvark office and discuss the next step.